System DOCKER
|
WORKING PARAMETERS |
VALUE |
|
Progress speed * |
0,74 - 369,0 cm/min |
|
Torque on shaft of roller positioners * |
According to type |
|
Vertical movement of torch head (Z axis) |
0,01 - 200,0 cm/min |
|
Horizontal movement of torch head (C axis) |
0,01 - 150,0 cm/min |
|
Pendel of the torch * |
+/- 20 mm |
|
Maximal loading of torch head by options of welding technoloqies |
130 Kgs |
|
Maximal loading of pendel head by welding torch |
5 Kgs |
|
Duty cycle ** |
24/7 |
| MOTORIC AXISES | VALUE |
| Rotation of roller positioners (HST CREATIVE CARRIER) * | Controlled axis |
| Vertical movement of the torch head (Z axis) | +/- 200mm, controlled axis |
| Horizontal movement of the torch head (C axis) | +/- 150mm, controlled axis |
| Rotary movement of the torch head (R axis) | 90°, manual axis |
| Pendel of the torch | +/- 20,0mm, controlled axis |
| TECHNOLOGY OF WELDING AND CONTROLLING | VALUE |
| Suitable methods of welding | SAW, MIG/MAG, TIG, Plasma Weld |
| Suction of flux for SAW method with automatic function * | Yes |
| Warning of running out of flux for SAW method * | Yes |
| Dimension of touchscreen in diagonal | 18,5" |
| Camera system IRIS NICK 02 for direct view into the weld * | SAW, TIG DC |
| Camera system IRIS NICK 02 for direct view into the weld * | Unlimited |
| Connection of welding device through START/STOP system | Yes |
| Controlled feeding of the wire * | Yes |
| Digital fixed control in the place of operation * | Proportional |
| POWER SUPPLY | VALUE |
| Power supply *** | 3x400V 50/60 Hz |
| Pressure air (dry, clean) * | 0,5 - 0,9MPa |
| Design | Mountable on constructions |
| Level of IP | IP 21 |
| Input for installation *** | |
| DIMENSIONS | VALUE |
| Height | |
| Width | |
| Depth | |
| Net weight *** |
* Optional item, or more versions are available which differs according to function. Mentioned parameters are valid for maximal options.
** 8/5 = lower loading in one duty period /// 16/6 = industrial loading /// 24/7 = non - stop loading
*** Parameters can not be provided with 100% correctness. Configuration of the machine must be taken into consideration. Mentioned parameters are valid for reaching maximal effective value.
Products 1 - 2 from 2 |
OBSERVER
Autonomous system of welding quality control by digital camera which enables clear view into the weld
Products 1 - 2 from 2 |