Cold wire Feeder CW 06
MACHINE VARIANTS
Necesary choice
The green color indicates an element or the part that have to be installed to the machine in one of the offered variants already during its production and the machine cannot be forward into the operation without it, or order it.
Construction surcharge
Yellow coloring means an element or the part which have to be installed into the machine in some of the offered variants already during its production. In principle it is a device extending functionality.
Free equipment
The gray coloration indicates an element or the part which is possible to fit the machine at any time later. Assembly is possible by the end user. In principle it is an equipment which expands functionality.
CW 06 Handy is extremely handy tool that can greatly facilitate the work of welders in stationary welding of growth of labor productivity, reduce the cost of welding material and increases the quality of production.
- CW 06 Handy is an autonomous Cold Wire Feeder with wide application. It is a separate fully digital device that can work as manual auxiliary equipment for TIG AC and DC TIG, may operate in the plasma beam welding (Plasma Weld) or with laser applications with feeding the wire in the range of 0,6 - 1,6mm.
- CW 06 Handy is designed for autonomous use in manual mode where is completely independent of another device and is directly controlled by operator command via foot controller, special ergonomic handle of cold wire feeding with switch, or another switching device. CW06 Handy is equipped with socket for connecting of switching device to control START/STOP funcionality for switching of working cycle.
- CW 06 Handy is made to be extremely durable steel self-supporting structure welded from sheet steel. Under the steel door is four roller wire feeder from the other side is mounted control electronics. On the front is the connection of cables of wire into the handle. Designed hole at the top of the hidden control panel that displays the parameter setting and its location prevents accidental damage to electronics. In the back of the feeder is systems connections. Plastic cover coil wire type K 300, with a maximum load of 20 kg. The entire device stand on four-wheeled chassis with front swivel wheels. Highly sophisticated ergonomics use practical handle to frame built into the device so that it can be in a balanced position, easy to carry.
- System of feeding is designed as unique construction system that is the result of HST CREATIVE research and development department activities and is patented. The device consists of four – roller feeder driven by especially designed digitally controlled driver. Construction of the driver eliminates ordinary problems with dynamics of feeding and may be operated even with high values of feeding – backwards and forwards by oscillation in 100% linearity of feeding up to limit frequency of feeding.
- CW 06 Handy is controlled by special control system which provides all of the sophisticated functions through the system of display and multifunction button. The device can be controlled by foot pedal or can be equipped with special ergonomic handle with switch. CW06 is equipped with a controlled valve that can open and close the inlet forming gas.
Benefits of product
√ Unique characteristics of the device enable any type of welding including the feeding of aluminium products without defects of the wire.
√ Feeding of the wire is even by welding with high oscillatory values of feeding forwards and backwards 100% linear up to limit frequency of feeding.
√ Precise feeding with displaying the parameter of amount of the wire brought into the weld in mm3/min fully suitable even for laser welding.
√ Simple but functional controlling through the system of one display and one multifunctional botton.
√ High - quality options taking the different methods of welding in consideration.
|
WORKING PARAMETERS |
VALUE |
|
Suitable diameters of the welding wires |
0,6 / 0,8 / 1,0 / 1,2 / 1,6 mm |
|
Suitable coils of the wire (K300 with adaptor) |
D 300, K300, D200 |
|
Suitable materials of the wires |
Fe / CrNi / CrMo / Flux / Al / Cu |
|
Duty cycle ** |
16/6 |
| TECHNOLOGIES | VALUE |
| Suitable methods of welding | TIG, Plasma Weld, KeyHole, Laser |
| Maximal frequency of welding | 10,0Hz |
| Minimal frequency of welding | 0,0 Hz |
| Maximal speed of the feeding in speed level A | 10,0 m/min |
| Minimal speed of the feeding in speed level A | 0,0 m/min |
| Maximal speed of the feeding in speed level B | 7,5 m/min |
| Minimal speed of the feeding in speed level B | - 7,5 m/min |
| Protective gases for feeding | 1 independant way |
| Controlled post - blow (for forming) | 0,0 - 15,0 sec |
| Remote control * | Yes |
| POWER SUPPLY | VALUE |
| Power supply | 1x230V/N/PE/50Hz |
| Design | mobile |
| Level of IP | IP 51 C |
| Input power *** | - |
| DIMENSIONS | VALUE |
| Height | 440,0 mm |
| Width | 360,0 mm |
| Depth | 800,0 mm |
| Net weight | 26,0 Kgs |
* Optional item, or more versions are available which differs according to function. Mentioned parameters are valid for maximal options.
** 8/5 = lower loading in one duty period /// 16/6 = industrial loading /// 24/7 = non - stop loading
*** Parameters can not be provided with 100% correctness. Configuration of the machine must be taken into consideration. Mentioned parameters are valid for reaching maximal effective value.
...Subject to change the technical parameters without notice.
Basic configuration of the machine
A
Complete machine base ready for precise configuration
(( 1 )) Selection of controller type
(( 2 )) Selection of handle for cold wire feeding
(( 3 )) Selection of accessories and improvements
Options
1
Basic type of foot controller with START/STOP function
(( √ )) Necessary for intended function of machine, NO ALTERNATIVE
(( Combination )) None
(( Options )) None
(( Condition )) Can be connected to standardized socket at any time
2.A
Handle for feeding the wire into the weld without working cycle switch, length 1,8 m
(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.B, 3.A, 3.B)
(( Combination )) Handle must be supplemented with START / STOP foot pedal for switch the working cycle
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools
2.B
Handle for feeding the wire into the weld without working cycle switch, length 3,2 m
(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.A, 3.A, 3.B)
(( Combination )) Handle must be supplemented with START / STOP foot pedal for switch the working cycle
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools
3.A
Handle for feeding the wire into the weld with working cycle switch, length 1,8 m
(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.B, 3.A, 3.B)
(( Combination )) Handle has working cycle switch, it does not have to be supplemented with foot pedal
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools
3.B
Handle for feeding the wire into the weld with working cycle switch, length 3,2 m
(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.B, 3.A, 3.A)
(( Combination )) Handle has working cycle switch, it does not have to be supplemented with foot pedal
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools
4
Movable carrier for the Feeder CW 06, height 880 mm, platform tilt +/- 15 °
(( √ )) This item simplifies the adjusting of the CW 06 feeder, NO ALTERNATIVE
(( Combination )) With cold wire feeder CW 06
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tool
 |
 |
 |
 |
|||
 |
 |
 |
 |
|||
 |