Beveling systems CUTTER

WORKING PARAMETERS

VALUE

Maximal static loading

5900,0 Kgs

Torque on shaft of main spindle

5350,5 Nm

Static angle clearance of main spindle 

< 55,0 arcmin 

Speed range of main spindle 

0,01 - 2,08 rpm

Duty cycle **

24/7
DIMENSIONS

VALUE

Optimization for arched bases according to standards   
Minimal diameter of cut base  800,0 mm
Maximal diameter of cut base  5000,0 mm
Maximal height - depth of cut base 1390,0 mm 
Minimal diameter of the hole (rotation of base in axis)  60,0 mm
Maximal diameter of the hole (rotation of base in axis)  690,0 mm
Minimal thickness of cut base  2,0 mm
Maximal thickness of cut base  50,0 mm
MOTORIC AXISES VALUE 
Rotation of main spindle Controlled axis
Rotation of arm with central holder of torch head into PARK position (R axis) 90°, special axis
Longitudinal movement of central holder of torch head (X axis) Full range, controlled by program
Stroke of torch head (Z axis) 1220,0mm, controlled by program
Elevation of the torch by circumferential cut (T axis)  + 55 až -40 °, controlled by program
Elevation of torch by cut of inner hole (T axis) +/- 45 °, controlled by program
Copy system (pneumatic adjustment of pressure power)  +/- 50,0mm, special axis
Adjustment of position of clamping segments  Full range, 3x manual axis
Adjustment of position of cut base by special tool (height) *  930,0mmmanual axis
Adjustment of position of cut base by special tool (centring) * 105,0mm, manual axis
TECHNOLOGY OF WELDING AND CONTROLLING VALUE
Suitable methods of cutting (types of generators) *  Focus Plasma, HQC Plasma
DC current for plasma generator transfered through the spindle 250A
Fixative system of cut base 3x vacuum
Gas console integrated in the tower  Yes
Remote control Yes
POWER SUPPLY VALUE 
Power supply 3x400V 50/60 Hz
Pressure air (dry, clean) 0,65 - 0,9MPa
Integrated exhaust system of fumes 2 automatic ways
Design Recommended to fix
Level of IP IP 21
Input for installation  
DIMENSIONS VALUE 
Height  
Width  
Depth  
Net weight  

 

* Optional item, or more versions are available which differs according to function. Mentioned parameters are valid for maximal options.

** 8/5 = lower loading in one duty period /// 16/6 = industrial loading /// 24/7 = non - stop loading

*** Parameters can not be provided with 100% correctness. Configuration of the machine must be taken into consideration. Mentioned parameters are valid for reaching maximal effective value.

 

Products per page: 6, 12, 24

Products 1 - 2 from 2

CUTTER TOWER 3

Automat for angular preparation of welded surfaces of bases of tanks with high capacity, 3000mm

CUTTER TOWER 3

CUTTER TOWER 5

Automat for angular preparation of welded surfaces of bases of tanks with high capacity, 5000mm

CUTTER TOWER 5

Products 1 - 2 from 2