Enter the code

Rotary welding automat HWR 2501.78

 

Necesary choice

The green color indicates an element or the part that have to be installed to the machine in one of the offered variants already during its production and the machine cannot be forward into the operation without it, or order it.

 

Construction surcharge

Yellow coloring means an element or the part which have to be installed into the machine in some of the offered variants already during its production. In principle it is a device extending functionality.

 

Free equipment

The gray coloration indicates an element or the part which is possible to fit the machine at any time later. Assembly is possible by the end user. In principle it is an equipment which expands functionality.

Rotary welding automat to perform circumferential welds in metal workshops and light industry even with a high hourly loading.

Simple conceptual solution and high durability of rotary welding automat guarantee an extremely favorable price and utility value ratio. In addition, the spindles holes offers the possibility of welding tubular and rod material or forming root of the weld with an inert gas. The RCS 06 control system brings to the operator the perfect functionality for full automation of the rotary circumferential welding process.

 

 

  • HWR COOPER 2501.78 is simple rotary welding automat suitable for circumferential welding with maximum turning diameter of 1000mm and maximum static load capacity of 620 kg. The dimension between the flanges (maximum product length) is 1500 - 6500mm.

  • Automat can be supplied in three production versions - Mk.IMk.II, or Mk.III. The spindle speed range for Mk.I version is set higher for rather lighter products of smaller diameter for rotation at higher speed however less torque is available. The Mk.II version has universal torque and spindle speed range for use with the standard sizes of welded products. The spindle speed range of Mk.III version is set lower. However higher torque is available for use with bulkier products of larger diameters with weight closer to the maximum allowed loading of automat. Therefore the choice of version should depend on the expected use.
  • The mechanical construction of welding automat is simple and sufficiently dimensioned for medium loads. The basic steel frame carries a supporting tower with an integrated drive and control system. The tailstock is moving manually along a linear ball guide. Welding torch arm carrier is mounted on the same longitudinal guide and thus provides to the operator a stable platform for positioning the torch arm.

  • The spindle drives are designed as backlash-free. The stepper motor spins precise planetary gearbox that propel belt and gears wheels with transverse teeth. The main spindle and the spindle of the tailstock has the same standard flanges for mounting of the universal chucks.

  • Tailstock pressure is designed as linear with a locking segment and equipped with pneumatic cylinder of 80mm with standard stroke of 300mm (the stroke can be increased on request).

  • Welding arm has pneumatic stroke and four degrees of release. At the end of the arm there is precise support of the torch position with backlash-free adjustment in two axes +/- 15 mm and the possibility of rotation by 90° with position locking. The welding torch holder can be designed for MIG or TIG torchs (others are on request).

  • Welding automat can be equipped with cold wire feeder HST CREATIVE CW 03. The cold wire feeder is fully controlled by RCS06 control system of welding automat and brings to the operator the maximum possibilities of setting of the feeding parameters including the reversation of the feeding wire.

  • Automat is controlled by the excellent control system RCS 06 which provides all conceivable functions for circumferential welding, including accelerations and decelerations of rotary movement, control of the welding source with separate programming and advanced functions of regulation of welding power. The possibility of saving programs and creating program compilations underline the sophistication of the control system.

 

 

contact-us.jpg

 

 


 

Using possibilities in a terms of weld type and technology 

√  Circumferential welding with one or two identical torches. Multiple torches = adjustment.

X  Equipping with more different welding technologies.

X  Linear and radial oscilation

X  Longitudinal welding and oscilation with controlled X axis.

X  Tilting of the tailstock 0 - 90°, performing of fillet and position welds. 

X  Layered screw welding with the possibility of controlled preheating.

X  Layered spiral welding with interpolation of rotation and torch displacement.

√  Control of the welding source by digital protocol Opencan or analog.

√  Feeding of the cold welding wire into the weld (TIG, PLASMA).

√  Protection of the root of the weld by controlled valve (max. 2 ways).

Main benefits

√  RCS 06 control system specially designed for circumferential welding tasks with high functional equipment.

√  Backlash-free drives with concept in the composition of Stepper motor > Planetary gearbox > Toothed belt transmission > Spindle.

√  Through-hole spindles with standardized flanges for connecting a standard universal chucks.

Tailstock pressure in the longitudinal axis by pneumatic cylinder, movement along the precise linear guides.

Sophisticated torch arm with many degrees of releasing achieving high variability for internal and external welding.

Durable design with protection of sensitive parts, transmission of welding current by professional milled CuCrZr wiper.

 

 

WORKING PARAMETERS

VALUE

Maximal static loading

 620,0 Kg

Torque on the main spindle shaft (Mk.I / Mk.II / Mk.III)

  181,0 / 362,0 / 604,0 Nm

Torque on the tailstock shaft (synchronized drive with the main spindle)(Mk.I / Mk.II / Mk.III) *

181,0 / 362,0 / 604,0 Nm

Speed range (Mk.I / Mk.II / Mk.III)

0 - 11,1 / 0 - 5,6 / 0 - 3,3 rpm

Duty cycle **

16/6
DIMENSIONS

VALUE

Maximal turning diameter 1000,0 mm
Distance between the main spindle and tailstock spindle flanges * 1500,0 - 6500,0 mm
Hole through the main spindle 78,0 mm
Diameter of the main spindle flange - recommended diameter of universal chuck 250,0 mm
Hole through the tailstock spindle 78,0 mm
Diameter of the tailstock spindle flange - recommended diameter of universal chuck  250,0 mm
Tailstock working cylinder stroke (standard delivery, adjustment on request) 300,0 mm
MOTION AXES VALUE 
Rotation of the main spindle Controlled axis
Rotation of the tailstock spindle (synchronized with main spindle) * Controlled axis
Longidutinal movement of the welding arm (X axis) Full function, manual axis
Stroke of the welding arm  Arc, pneumatically
Adjustment of the welding arm basic position (3 joints) Full function, manual axis
Precise adjustment of the torch position  +/- 15,0 mmmanual axis
Precise adjustment of wire feeding *  +/- 5,0 mmmanual axis
TECHNOLOGY OF WELDING AND CONTROLLING   VALUE
Suitable methods of welding MIG/MAG, TIG, Plasma Weld, Laser
Electric current for DC transfered by spindle  450A
Electric current for AC transfered by spindle  350A
Connection of the welding source through START/STOP system Yes
Connection of the welding source through the system of UP/DOWN logic Yes
Automatic torch height monitoring by axis Z - electro mechanic sensor (MIG/MAG, TIG) No
Programmable feeding of the wire (0,6 / 0,8 / 1,0 / 1,2 / 1,6 mm)(Fe / CrNi / CrMo / Flux / Al / Cu) * Yes
Remote control * Yes
POWER SUPPLY  VALUE
Power supply 3x400V/N/PE/50 Hz
Pressure air (dry, clean) 0,5 - 0,7 MPa
Protective gases for welding 1 independant way
Protective gases for root protection * 2 independant ways
Design Stand desing, necessary to anchor
Level of IP IP 51 C
Input power ***
DIMENSIONS VALUE 
Height 1330 mm
Lenght ***
Depth 1255 mm
Net weight *** 550 kg

 

* Optional item, or more versions are available which differs according to function. Mentioned parameters are valid for maximal options.

** 8/5 = lower loading in one duty period /// 16/6 = industrial loading /// 24/7 = non - stop loading

*** Parameters can not be provided with 100% correctness. Configuration of the machine must be taken into consideration. Mentioned parameters are valid for reaching maximal effective value.

 

...Subject to change the technical parameters without notice.

...The information given here describes entire RCS 06 control system with all possibilities which however may not be available for every machine depending on technological possibilities of specific machine. It also depends on selected machine configuration. Therefore is always necessary get acquainted with the specific machine at first whether its technological possibilities, even with regard to the configuration you have chosen, support all functions described below, or not. Informations given in here are the overview about possibilities of control system, not the machine and do not give explanation of individual components because of difficult comprehensibility of more complicated functions and equipment. For more details, please, contact the technical department or sales of HST CREATIVE.

 

 

rcs06_nahled.png

 

 

Control system RCS 06

 

WORKING DATA

 

Basic choices

Settings of the basic informations about the production (Rotary welding, linear welding, Layered screw or spiral welding)

Settings of information about diameter of the product (Middle diameter of weld in mm)

Assigning of the specific welding source to the specific welding head.

 

Axis...Rotation

- The direction of the rotation - Left or Right

- The delay of the rotation before the welding (time after the confirmation of the stable arc is sent from the welding source)

- First acceleration (settings of angle and value)

- Angle of rotation (maximal 720°, exactness 0,1°)

- Acceleration during the turning (settings of angle and value)

- Deceleration at the end of the turning for creating of the precise closing sequence and defect-free connection of beginning and end of the weld in a rotary welding (settings of angle and value)

- Spot welding (function enables to put regularly placed welded points along the circumference of welded product)

- Return to start point 0 (exact return to the start point - settings as shorter way or the whole way back)

 

Axis...Motoric

In rotary mode of welding - the setting of the longitudinal welding position on the X Axis and its acting during the working cycle

In longitudinal mode of welding - the setting of the welding position, the delay of activity after the welding process has started, the final time of welding, finishing of the sequence, the acting during the working cycle and radial position of the weld on the rotary axis

- The angle of tailstock's spindle 0- 90° (some of the machines). The fluent movement using the exact drive of tailstock's tilt or the logic of this function in case that the machine is equipped by the tailstock with pneumatically controlled stroke.

 

Axis...Of the torch

- The height of welding set by Z axis or the logic of controlling the pneumatical stroke of the torch.

- The position of welding set by another controlled axises of the arm of the torch (Z and K axis or the five - axis jointed arm).

 

Pendel

- The delay of the pendel after the confirmation of the stable arc is sent by the welding source.

- Frequency of the oscillatory movement (Hz).

- Right/Left divergence (in mm, separately for each side, exactness 0,1mm).

- Right/Left delay, delay in the middle (sets the linearity of pendeling, setting in sec.).

- The choice of programmed pendeling to some of the controlled axises.

 

The wire feeder (feeder CW 03, or CW 09 is needed)

- The delay of starting the wire feeding after the sign of the stable arc is sent by the welding machine (sec).

- Frequency of feeding. The frequency of changes in the speed of feeding of the wire (Hz).

- The Top (A) and Bottom speed (B) of feeding. Individual speeds (AB) of feeding are set separately (0 - 10m/min).

- The crumb. Setting of ratio between Top and Bottom speed of feeding (set in %).

- Oscillating wire reversation. It changes the direction of the wire feeding in the sense of setting of the bottom feeding speed (the wire burns out in batches with all of the benefits of this wire feed procedure

- Wire is pull in at the end of welding to prevent residual oxidation of the wire.

 

Controlling the source

- Control of the welding source depending on the selected system. Full MASTER digital control via HST CREATIVE OpenCan interface. Or simple analog controling via the REL analog element.
- Set of welding source switching ON angle (0 - 720°) and welding source switching OFF angle (max. 720°).

 

Forming gas

Pre-blowing and after-blowing of forming gas into the torch for welding source number 1 and for welding source number 2.

Pre-blowing and after-blowing of forming gas.

 

 

 

 

 

 

 

 

Another device

- Setting of digital remote control "Mighty controller"

- Control of the HST CREATIVE NICK 03 camera system (position setting and shooting parameters).
- High-precision control of welding position above the welded surface sensing by electromagnetic touch sensor.
- Welding data scanning and welding quality evaluation system.
- Connection of other external systems.

 

PROGRAMS - MEMORY BOXES

The machine can memorize the own settings including the whole working cycle. There is a possibility to name, edit, copy, shift (199 free positions)

 

PROGRAMS - COMPILATION

- Programs safed in Memory boxes can be arbitrarily combinated into the functional lines and can create even the difficult working cycle. For example it is possible to weld like that (fully automated cycle with visual checking always with program changing - BREAK function):

 

Program 1 - The root layer of the weld done by TIG method without pendelling of the torch, speed range 45cm/min, without additional wire, power supply 72A.

Program 2 - The layer number two done by TIG method with pendelling of the torch and using the cold wire feeder, speed range 65 cm/min, power supply 160A.

Program 3 - The layer number three done by MAG PULSE method with pendelling of the torch, speed range 72cm/min, power supply 235 A.

 

QUICK OPTIONS

- Choice between automatic and manual mode at the touch of one button.

- "No Weld" function is available used to test the settings without welding.

- "Triangulation" button. A special button that is used to save the current positions of all controlled machine axes based on visual inspection by the operator. The machine records the visual input as the detected coordinates of the controlled axes.

 

DIRECT FUNCTIONS

Forming gas test button (opens all of the gas valves when pressed).
Welding torch manual tilt button.
- Button for manual closing of the pneumatic elements (for example tailstock pressing).

 


 

WELDED PARTS

- The machine is a universal and sophisticated production unit with the ability to weld any of the industrial production within the dimensional and weight limits of the machine. It is possible to perform rotary circumferential welds, fillet welds in the PA / PB position thanks to the tilting tailstock (only in the case of some of the machines) and it is also possible to perform full-fledged longitudinal welds (only the machines with controlled X axis).

- Typical is the production of pressure and non-pressure tanks from all materials with all of the methods of arc welding with the exception of the SAW method. Thanks to the high overall accuracy the machine enables welding of machine parts, flanges, shafts, heat exchangers, tube sheets.

- The machine is able to work in a layered screw welding mode (only the some machines) on the surface of the cylinder and also on the surface of the plate by the spiral layered welding tilted to the 90° (only the machines equipped with the tilting tailstock). Spiral layered welding has interpolated rotation and torch movement - change spindle rotation speed depending on the current diameter. The special software also provides the possibility of welding individual layers of layered welds (it uses a controlled Z axis of the torch stroke). It is also possible to equip the machine with the controlled preheating system of the welded part with digital surface temperature measurement.

 

 

TIPS FOR BETTER USE

- An excellent addition is the sophisticated Mighty Controler remote control. It is a freely programmable device by which is possible to control all of the necessary machine functions directly during the welding.

- The control system of the machine is well developed, it provides on-line information about the current rotation speed and the current progress speed. Operating is done using the standard multi-layer MENU.

- Software compilations provide perfect possibilities for fully automated production composite of many different welds.

- Double Torch versions does not restrict the users in the production of technologically complex products and aplications. One method can be used for welding of the root of the weld, another one can be used for the covering layers.

- The tilting tailstock significantly expands the usability of the machine by position welding at angles of 0 - 90°.

- Digital cold wire feeders provide precise welding results in the widest range of applications.

Basic configuration of the machine

C, D, E

Rotary welding automat HWR 2501.78

Complete machine base ready for precise configuration

(( 1 )) Selection of tailstock type as driven or non-driven variant
(( 2 )) Selection of the torch welding arm and the functionality of torch holding elements
(( 3 )) Selection of technological accessories and improvements
(( 4 )) Selection of welding source and other accessories and complements

Basic equipment for automatization

1

Surcharge per 1 meter lenght (basic lenght between flanges = 1.500 mm)

Complete group of construction, linear guides and all energy pathways

(( √ )) Item is necessary for the intended function of the machine, NO ALTERNATIVE
(( Combination )) Selection of this item extends the working length of the machine. The MAXIMUM is 5
(( Options )) On request is possible to change the stroke of the tailstock pressure cylinder and its force
(( Condition )) Construction change which affects the design of the machine in an unchanging way

2.1

Tailstock with loose spindle for versions Mk.I, Mk.II, Mk.III

Complete tailstock without drive with freely rotating spindle (flange 250mm, hole 78mm)

(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.2)
(( Combination )) Selection of this item precludes the selecting of item (2.2)
(( Options )) On request is possible to change the stroke of the tailstock pressure cylinder and its force
(( Condition )) Assembled and mounted directly at the production

2.2

Synchronized drive of the tailstock with main spindle for Mk.I. version

Complete tailstock without drive with freely rotating spindle (flange 250mm, hole 78mm)

(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.1)
(( Combination )) Selection of this item precludes the selecting of item (2.1)
(( Options )) On request is possible to change the stroke of the tailstock pressure cylinder and its force
(( Condition )) Assembled and mounted directly at the production

2.3

Synchronized drive of the tailstock with main spindle for Mk.II. version

Complete tailstock without drive with freely rotating spindle (flange 250mm, hole 78mm)

(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.1)
(( Combination )) Selection of this item precludes the selecting of item (2.1)
(( Options )) On request is possible to change the stroke of the tailstock pressure cylinder and its force
(( Condition )) Assembled and mounted directly at the production

2.4

Synchronized drive of the tailstock with main spindle for Mk.III. version

Complete tailstock without drive with freely rotating spindle (flange 250mm, hole 78mm)

(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.1)
(( Combination )) Selection of this item precludes the selecting of item (2.1)
(( Options )) On request is possible to change the stroke of the tailstock pressure cylinder and its force
(( Condition )) Assembled and mounted directly at the production

3

Torch head for one torch with pneumatical stroke in Z axis

Manually movable in axis X with pneumatic inclination to the working position. Equipped with a brake.

(( √ )) Item is necessary for intended function of the machine, NO ALTERNATIVE
(( Combination )) This item have to be further fitted with item ARM 1 JOINT HOLDER, or ARM 2 SLIDE
(( Options )) None
(( Condition )) Assembled and mounted directly at the production

4.1

ARM 1 JOINT HOLDER

Articulated segment enabling a clamping of a straight welding torch with diameters of 28 - 42 mm

(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (ARM 2 SLIDE)
(( Combination )) None
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools

4.2

ARM 2 SLIDE. Mechanical head +/-15mm (axis X/Z/T/J)

Cross head with precise adjustment of +/-15mm in axes X and Z and rotation of torch holder with fixation per each 30°

(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE
(( Combination )) This item have to be further fitted with item (ARM 2 TILT TORCH HOLDER)
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools

4.3

ARM 2 TILT TORCH HOLDER

Holder for MIG or TIG torch with tilting function at five fixed angles per each 15°

(( √ )) Item is necessary for intended function of the machine, NO ALTERNATIVE
(( Combination )) ARM 2 SLIDEMICRO is mounted on this part in the case of cold wire feeder is installed
(( Options )) Select a diameter of the torch, standard is 34mm. It have to always be a straight torch
(( Condition )) Can be installed in a simple operation without use of special tools

5.1

Digital cold wire feeder CW 03 (electronics + connection included)

Feeder of cold wire 1,2 and 1,6 mm for TIG welding or PLASMA WELD

(( √ )) This item extends the functionality of the machine with effect to welding technology, NO ALTERNATIVE
(( Combination )) ARM 2 SLIDEMICRO have to be selected for proper function
(( Options )) If mounted on machines without a platform, it is advisable to select the feeder carrier
(( Condition )) Assembled and mounted directly at the production

5.2

Tiltiable carrier for feeder CW 03, movable along the wheels

Movable carrier for the Feeder CW 03, height 880 mm, platform tilt +/- 15 °

(( √ )) This item simplifies the adjusting of the CW 03 feeder, NO ALTERNATIVE
(( Combination )) With cold wire feeder CW 03
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tool

5.3

ARM 2 SLIDE MICRO

Cold wire feeding end element with the possibility of precise adjustment +/-5mm with cooled girder

(( √ )) Precisely made set feeds cold wire directly into the weld, NO ALTERNATIVE
(( Combination )) Mounted on the ARM 2 TILT TORCH HOLDER
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tool

6.1

SET for solenoid control of forming gas

SET for solenoid control of forming gas - one way

(( √ )) Auxiliary element that improves the operation by switching the forming gas flow, NO ALTERNATIVE
(( Combination )) None
(( Options )) None
(( Condition )) Assembled and mounted directly at the production

6.2

FLOW A1 SET

Separate float flow meter with precise needle valve. Mounting on the surface through hole

(( √ )) Auxiliary equipment that improves the machine funcionality, bringing gas savings, NO ALTERNATIVE
(( Combination )) Mounted on the machine or can be mounted on a free-standing carrier, height 950mm
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools

7.1

Complex remote control Mighty Controller

Digital remote control with backlit display with the possibility of configuration of button functionality

(( √ )) Improves machine usability and facilitates direct welding control, NO ALTERNATIVE
(( Combination )) It is advisable to add a Holder for Mighty Controller
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools

7.2

Holder for Mighty Controller

Holder for remote control Mighty Controller freely mountable on any surface or the machine

(( √ )) Reduces the risk of damage to the Mighty Controller, NO ALTERNATIVE
(( Combination )) Used in conjunction with Mighty Controller
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tool

8.1

ANALOG SET for connection of one more power source

Set of internal electronics and installation elements for connecting of another source to the machine

(( √ )) Extends functionality of machine with the parallel welding with additional source, NO ALTERNATIVE
(( Combination )) Can be used with any kind of welding source on the analog START/STOP principle
(( Options )) Up to four simultaneous sources can be connected on request
(( Condition )) Assembled and mounted directly at the production

8.2

Digital OPEN CAN SET

Set of internal electronics and installation elements for digital connection of welding source

(( √ )) Allows full control of welding source, including program switching, NO ALTERNATIVE
(( Combination )) Can be used only with HST CREATIVE and CEBORA, limitedly LORCH (on request)
(( Options )) Two independent welding sources can be connected
(( Condition )) Assembled and mounted directly at the production

9

Ground cable 50 mm2, length 3,0 m

Separate ground cable on both sides terminated with a standard connection of 13mm

(( √ )) Copper cable closing the electric arc between the welding source and the machine, NO ALTERNATIVE
(( Combination )) None
(( Options )) Other cable lengths can be ordered on request
(( Condition )) Can be installed in a simple operation without use of special tools

Accessories

0.B

Universal chuck 250mm

Three-jaw universal chuck with gears adjusted for welding, hole 78mm, weight 22.2kg

(( √ )) Chuck can be mounted on spindle flanges without transition elements, HAS AN ALTERNATIVE
(( Combination )) The chuck can be fitted with extended segments (custom made solution)
(( Options )) Other chucks can be choosed, but these have to be mounted using transition elements
(( Condition )) Can be installed in a simple operation without use of special tools

-

Clamping lunette, 30 - 300mm, stroke 130mm

Vertically and transversely adjustable pipe support with pneumatic pressure and five pulleys

(( √ )) Mounted on the linear guide of the machine by means of rolling nests, NO ALTERNATIVE
(( Combination )) None
(( Options )) Functional ranges can be customized on request
(( Condition )) Can be installed in a simple operation without use of special tool

-

Spatial wheel support, 100 - 900mm, max.350kg

Vertically and transversely adjustable pipe support with independent arms for optimal tangential supporting

(( √ )) Mounted on the linear guide by means of rolling nests, HAS AN ALTERNATIVE (PARALLEL SUPPORT)
(( Combination )) None
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tool

-

Parallel wheel support, 100 - 900mm, max.750kg

Vertically and transversely adjustable pipe support with arms clamped by a double-sided moving screw

(( √ )) Mounted on the linear guide by means of rolling nests, HAS AN ALTERNATIVE (SPATIAL SUPPORT)
(( Combination )) None
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tool

Rotary welding automat HWR 2501.78

Rotary welding automat HWR 2501.78

Rotary welding automat HWR 2501.78

Rotary welding automat HWR 2501.78

Rotary welding automat HWR 2501.78

Rotary welding automat HWR 2501.78

Rotary welding automat HWR 2501.78

Rotary welding automat HWR 2501.78

Rotary welding automat HWR 2501.78

Rotary welding automat HWR 2501.78

Rotary welding automat HWR 2501.78