Enter the code

Feeder CW 06

 

Necesary choice

The green color indicates an element or the part that have to be installed to the machine in one of the offered variants already during its production and the machine cannot be forward into the operation without it, or order it.

 

Construction surcharge

Yellow coloring means an element or the part which have to be installed into the machine in some of the offered variants already during its production. In principle it is a device extending functionality.

 

Free equipment

The gray coloration indicates an element or the part which is possible to fit the machine at any time later. Assembly is possible by the end user. In principle it is an equipment which expands functionality.

...CW 06 Handy is extremely handy tool that can greatly facilitate the work of welders in stationary welding of growth of labor productivity, reduce the cost of welding material and increases the quality of production.

 

  • CW 06 Handy is an autonomous Cold Wire Feeder with wide application. It is a separate fully digital device that can work as manual auxiliary equipment for TIG AC and DC TIG, may operate in the plasma beam welding (Plasma Weld) or with laser applications with feeding the wire in the range of 0,6 - 1,6mm.

  • CW 06 Handy is designed for autonomous use in manual mode where is completely independent of another device and is directly controlled by operator command via foot controller, special ergonomic handle of cold wire feeding with switch, or another switching device. CW06 Handy is equipped with socket for connecting of switching device to control START/STOP funcionality for switching of working cycle. 

  • CW 06 Handy is made to be extremely durable steel self-supporting structure welded from sheet steel. Under the steel door is four roller wire feeder from the other side is mounted control electronics. On the front is the connection of cables of wire into the handle. Designed hole at the top of the hidden control panel that displays the parameter setting and its location prevents accidental damage to electronics. In the back of the feeder is systems connections. Plastic cover coil wire type K 300, with a maximum load of 20 kg. The entire device stand on four-wheeled chassis with front swivel wheels. Highly sophisticated ergonomics use practical handle to frame built into the device so that it can be in a balanced position, easy to carry.

  • System of feeding is designed as unique construction system that is the result of HST CREATIVE research and development department activities and is patented. The device consists of four – roller feeder driven by especially designed digitally controlled driver. Construction of the driver eliminates ordinary problems with dynamics of feeding and may be operated even with high values of feeding – backwards and forwards by oscillation in 100% linearity of feeding up to limit frequency of feeding.

  • CW 06 Handy is controlled by special control system which provides all of the sophisticated functions through the system of display and multifunction button. The device can be controlled by foot pedal or can be equipped with special ergonomic handle with switch. CW06 is equipped with a controlled valve that can open and close the inlet forming gas.

 


 

Benefits of product

√  Unique characteristics of the device enable any type of welding including the feeding of aluminium products without defects of the wire.

√  Feeding of the wire is even by welding with high oscillatory values of feeding forwards and backwards 100% linear up to limit frequency of feeding.

  Precise feeding with displaying the parameter of amount of the wire brought into the weld in mm3/min fully suitable even for laser welding. 

  Simple but functional controlling through the system of one display and one multifunctional botton.

  High - quality options taking the different methods of welding in consideration. 

WORKING PARAMETERS

VALUE

Suitable diameters of welding wires

 0,6 / 0,8 / 1,0 / 1,2 / 1,6 mm

Suitable coils of the wire (K300 with adaptor)

D 300, K300, D200

Suitable materials of wires 

Fe / CrNi / CrMo / Flux / Al / Cu

Duty cycle **

16/6
TECHNOLOGIES  VALUE
Suitable methods of welding TIG, Plasma Weld, KeyHole, Laser
Maximal frequency of welding 10,0Hz
Minimal frequency of welding 0,0 Hz
Maximal speed of feeding in speed level A 10,0 m/min
Minimal speed of feeding in speed level A 0,0 m/min
Maximal speed of feeding in speed level B 7,5 m/min
Minimal speed of feeding in speed level B  - 7,5 m/min
Protective gases for feeding 1 independant way
Controlled post - blow (for forming) 0,0 - 15,0 sec
Remote control * Yes
POWER SUPPLY VALUE 
Power supply 1x230V/N/PE/50Hz
Design mobile
Level of IP IP 51 C
Input power *** -  
DIMENSIONS VALUE 
Height 440,0 mm
Width 360,0 mm
Depth 800,0 mm
Net weight 26,0 Kgs

 

* Optional item, or more versions are available which differs according to function. Mentioned parameters are valid for maximal options.

** 8/5 = lower loading in one duty period /// 16/6 = industrial loading /// 24/7 = non - stop loading

*** Parameters can not be provided with 100% correctness. Configuration of the machine must be taken into consideration. Mentioned parameters are valid for reaching maximal effective value.

 

...Subject to change the technical parameters without notice.

Basic configuration of the machine

A

Feeder CW 06 Handy

Complete machine base ready for precise configuration

(( 1 )) Selection of controller type
(( 2 )) Selection of handle for cold wire feeding
(( 3 )) Selection of accessories and improvements

Options

1

Foot controller START/STOP

Basic type of foot controller with START/STOP function

(( √ )) Necessary for intended function of machine, NO ALTERNATIVE
(( Combination )) None
(( Options )) None
(( Condition )) Can be connected to standardized socket at any time

2.A

Handle for feeding the wire 1,8 m

Handle for feeding the wire into the weld without working cycle switch, length 1,8 m

(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.B, 3.A, 3.B)
(( Combination )) Handle must be supplemented with START / STOP foot pedal for switch the working cycle
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools

2.B

Handle for feeding the wire 3,2 m

Handle for feeding the wire into the weld without working cycle switch, length 3,2 m

(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.A, 3.A, 3.B)
(( Combination )) Handle must be supplemented with START / STOP foot pedal for switch the working cycle
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools

3.A

Handle of cold wire feeding with switch 1,8m

Handle for feeding the wire into the weld with working cycle switch, length 1,8 m

(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.B, 3.A, 3.B)
(( Combination )) Handle has working cycle switch, it does not have to be supplemented with foot pedal
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools

3.B

Handle of cold wire feeding with switch 3,2m

Handle for feeding the wire into the weld with working cycle switch, length 3,2 m

(( √ )) Item is necessary for intended function of the machine, HAS AN ALTERNATIVE (2.B, 3.A, 3.A)
(( Combination )) Handle has working cycle switch, it does not have to be supplemented with foot pedal
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tools

4

Tiltiable carrier moveable along the wheels, height 880mm, +/- 15°

Movable carrier for the Feeder CW 06, height 880 mm, platform tilt +/- 15 °

(( √ )) This item simplifies the adjusting of the CW 06 feeder, NO ALTERNATIVE
(( Combination )) With cold wire feeder CW 06
(( Options )) None
(( Condition )) Can be installed in a simple operation without use of special tool

CW 06 - ergonomic and durable

Control box "one click"

Four wheel wire feeder

Ergonomic handle

CW 06 - handy helper

Hand welding

Cooperation with automation

Cooperation with automation

Little weld with wire 0,6mm