Enter the code

Linear welding automat AWL SUPERFINE

 

Necesary choice

The green color indicates an element or the part that have to be installed to the machine in one of the offered variants already during its production and the machine cannot be forward into the operation without it, or order it.

 

Construction surcharge

Yellow coloring means an element or the part which have to be installed into the machine in some of the offered variants already during its production. In principle it is a device extending functionality.

 

Free equipment

The gray coloration indicates an element or the part which is possible to fit the machine at any time later. Assembly is possible by the end user. In principle it is an equipment which expands functionality.

Linear welding automat to perform the precise longitudinal welds on cooper pad designed for industruial use also with high hourly loading.

Linear automat is determinated to weld pipes, flues, suction pipes, galvanized pipes and other products suitable for longitudinal welding. Automat can operate in manual or automatic mode with high level of automatic functions including functions for increase working productivity. LCS 06 control system designed specially for longitudinal welding purposes brings uniquely sophisticated approach to functions including communication with the welding source.

 

 

  • AWL SUPERFINE 1550.T is linear welding automat for longitudinal welding on copper base with double-sided holding of weldment with maximum length of 1550 mm and with controlled protection of the root of the weld with forming gas by the CascadeGas system. Central block of the machine is made of steel and supported by two ergonomically shaped supports. All electronic components and cooling system are located inside this block. Automat is designed for TIG AC/DC and Plasma AC/DC welding and is suitable for welding of alloy and non-alloy steel, CrNi steel, copper, aluminum, titanium and other materials such as galvanized steel and aluminized steel.

  • The construction of linear automat's force arms is designed as steel welded half-shell spatial costruction which is characterized by controlled flexibility thanks to the unique design of elasticity. Both arms are fixed to the central block which fixes the welding thorn. Left arm carries the linear linnings of the torch head. The pressure of the weldment against the welding thorn is realized pneumatically via gear levers with transversely adjustable segments made of high-quality CuCrZr alloy (as custom made solution the linear automat can be equipped with pressure segments from stainless steel whichs are necessary for example for welding of aluminum for better cooling after welding). Central block is located on spatially welded robust construction in which the electronics and integrated high-performance cooling system are located. This linear automat is designed for products with maximum diameter of 1000 mm. However, maximum diameter up to 1500 mm can be achieved with hydraulic lifting mechanism which can be delivered with zhe linear automat beyond the standard construction. Hydraulic lifting mechanism is supported on linear guides by robust welded base with tubular column and two stabilizing supports. During designing of machine we also solved problem of suction of welding fumes by integrating the suction channel directly into the construction without negative effect on welding process which is advantagous especially when welding galvanized materials. The connection of this device is solved by pipe with diameter of 100 mm.

  • Welding thorn is made of low-alloy steel with high flexural strength. Uniquely designed precisely machined CuCrZr alloy basis bar internally cooled by liquid is mounted on the welding thorn in which CascadeGas system for saving shielding gas while protecting the root of the weld is also integrated. Basis bar can be also made from stainless steel as custom made solution for welding of aluminum.

  • Gas management is divided into three independent ways - torch way, after-cooling way of the weld track and the forming gas way. Forming gas way uses our unique CascadeGas system. Set of valves switches forming gas so the gas protects the root of the weld only in necessary length depending on current position of welding torch. According to position of welding torch CascadeGas system automatically divides the forming gas into each sections. As result the consumption of forming gas is significantly reduced up to 80%. All gas ways are equipped with precise flow meters and valves that precisely control gas flow.

  • Torch head is equipped with pneumatically controlled torch holder which is parked in horizontal position to facilitate visual checking of condition of each parts of the torch. Longitudinal movement of the torch head is done with backlash-free drive system of servomotor, planetary gearbox and belt drive. The positioning of the torch has repeatable accuracy of 0,2 mm and welding speed from 10 cm/min to 300 cm/min, rapid traverse is 600 cm/min.

  • Linear automat can be equipped with a cold wire feeder HST CREATIVE CW 09. The cold wire feeder is fully controlled by the LCS06 control system and brings to the operator the maximum possibilities of setting of the feeding parameters including the reversation of the feeding of the wire.

  • Linear automat is controlled by LCS 06 control system which has been designed especially for longitudinal welding. The system has wide range of sophisticated functions by which all the requirements of longitudinal welding are solved. LCS06 controls the whole spectrum of interesting and sophisticated functions including UP/DOWN logic.

 

 

contact-us1.jpg

 

 


 

Main benefits

  Possibility of adjusting the working height of the linear automat for the maximum diameter of the weldment 1500 mm with the use of hydraulics.

√  Mechanical construction with controlled flexibility and clamping by pressure segments with enable to adjust clamping pressure and distance for optimal results.

√  Use of high - percentage alloy of CuCrZr for underlying lath and for pressure segments, which can rapidly increase the lifespan of consumables.

√  Positioning of the torch in horizontal position enables to do the vizual control of parts of the torch easier. By this step is the amount of rejects, caused by defects of the torch, eliminated.

√  Three - way system of technical gases with unique Cascade Gas system, which saves about 80% of gases, used for forming of root of the weld.

√  Liquid cooling system integrated directly into the construction of the linear automat enables to cool the thorn and the torch at the same time.

√  Cold wire feeder, controlled directly by control system, can be added and enables to perform normalized layered welds. 

√  Integrated exhaust system suitable for high - vacuum extraction directly from the torch with high efficiency of exhausting of high - smoky methods.

√  Control system LCS06 with sophisticated functions and special - purpose programs for controlling of phase production and increasing of productivity. 

WORKING PARAMETERS

VALUE

Maximal progress speed of welding

 300,0 cm/min

Minimal progress speed of welding

 10,0 cm/min

Maximal specific pressure by clamping the tube/shell

  250,0 N/mm2

Minimal specific pressure by clamping the tube/shell

0,35 N/mm2

Duty cycle **

24/7
DIMENSIONS

VALUE

Maximal lenght of the shell/tube 1550,0 mm
Minimal lenght of the shell/tube 50,0 mm
Maximal diameter of the shell/tube (shape of the shell/tube is precisely rounded)(without hydraulic lifting device / with hydraulic lifting device)
1000,0 mm / 1500,0 mm
Minimal diameter of the shell/tube (choice of optimal thorn for welding) * 100,0 / 120,0 mm
Maximal effective thickness of the welded shell/tube 3,0 mm
Maximal thickness of the welded shell/tube 4,0 mm
Minimal effective thickness of the welded shell/tube 0,3 mm
MOTION AXES VALUE 
Movement of the torch head Controlled axis
Precise adjustment of the torch position +/- 10,0 mm,manual axis
Precise adjustment of feeding the wire position * +/- 5,0 mm, manual axis
TECHNOLOGY OF WELDING VALUE
Suitable methods of welding TIG, Plasma Weld
Controlled forming of root of the weld CascadeGas system
Connection of welding device through START/STOP system Yes
Controlling of start sequence of welding sources  Yes
Precise controlling of pneumatic pressure of welded shell/tube Yes
Automatic phasing of clamping the shell/tube * Yes
Controlled feeding of the wire (0,6 / 0,8 / 1,0 / 1,2 / 1,6 mm)(Fe / CrNi / CrMo / Flux / Al / Cu) *

Yes

POWER SUPPLY VALUE 
Power supply 3x400V/N/PE/50Hz
Pressure air (dry, clean) 0,5 - 0,7 MPa
Protective gases for welding torch and additional devices 2 independant ways
Protective gas for forming of root of the weld by CascadeGas system 1 independant way
Design Stand design
Level of IP IP 51 C
Input power for installation ***
DIMENSIONS VALUE 
Height ***
Width ***
Depth ***
Net weight *** 750 kg

 

* Optional item, or more versions are available which differs according to function. Mentioned parameters are valid for maximal options.

** 8/5 = lower loading in one duty period /// 16/6 = industrial loading /// 24/7 = non - stop loading

*** Parameters can not be provided with 100% correctness. Configuration of the machine must be taken into consideration. Mentioned parameters are valid for reaching maximal effective value.

 

...Subject to change the technical parameters without notice.

LCS 6 - digital control system is designed specially for linear welding machines. This system solves most of the needs during welding of longitudinal welds and contains a range of highly sophisticated functions. Informations given in here are the overview about possibilities of control system, not the machine and do not give explanation of individual components because of difficult comprehensibility of more complicated functions and equipment. For more details, please, contact the technical department or sales of HST CREATIVE.

 

 

lcs06_nahled.png

 

 

Control system LCS 06 for linear welding automats AWL

 

Basic modes

  • Fully automatic mode is available.

  • Manual welding mode is suitable for single-part production.

  • No Weld mode - does not weld, facilitates parameters setting of welding and the whole working cycle.

 

Working modes

  • Uninterrupted welding mode

  • Tack welding mode allows make any amount tacks

  • Spot welding mode

  • Spotting with owerwelding mode

  • Mode with displaced start of welding

  • Centre start mode

  • Starting tack mode

 

Working function

  • Setting of forming gas pre-flow.

  • Setting of welding starting position.

  • Setting of torch moving delay for beginning material heating.

  • Setting of weld lenght.

  • Setting of switching off welding machine position.

  • Stiching function allows to make any amount of spots at any lenght.

  • Welding machine program option.

 

Programming

  • LSC 6 is system, which allows user to save complex settings of particular product in the memory boxes.

  • It is possible to name the memory boxes verbally and to pair them with programs on the welding machine.

  • 100 of free memory boxes

 

Supporting functions

  • Confirmation of  a welding arch. LSC 6 waits for the signal from the welding machine, when the signal is received  a program begins to use set working cycle. This is a fundamental function for welding of thin materials, especially aluminium welding. This function also eliminates unreliable ignitions.

  • Controlling system. High technical level of this product is emphasized by controlling system, which check correct settings and also block the machine in case of functional or user mistake. All faults are namely displayed and indicated by LED "Incomplete".

  • AR function. Very unique AR function allowing to weld metal plates, which are not cut straight, without switching or rotating the material. This function is very substantial in practice, because it is able to weld inaccurately cut plates with productivity, which the same machine without this function can never achieve.

  • Mid-product welding function. It allows to weld from the middle to the right, then the torch returns to the middle at the place already welded and then makes a weld to the left. This function is suitable for welding of thick materials, when the tubes are extremely inaccurate.

Basic configuration of the machine

D

Linear welding automat AWL SUPERFINE 1550.T

Complete machine base ready for precise configuration

(( 1 )) Selection of machine fixed base or version with hydraulic lift
(( 2 )) Selection of thorn for required minimum diameter of the welded product
(( 3 )) Selection of technological elements, accessories and improvements
(( 4 )) Selection of welding source and other accessories and complements

Basic equipment for automatization

3.1

Thorn type 096.1550 FORM for minimal diameter of product 100mm

Welding thorn FORM to automats AWL 1550.T for minimal diameter of welded product of 100mm

(( √ )) Item is necessary for intended function of machine, HAS AN ALTERNATIVE (3.2, 3.3)
(( Combination )) Selection of this item precludes the selecting of item (3.2, 3.3)
(( Options )) Basis bar can be also made of stainless steel as custom made for welding of aluminum
(( Condition )) Assembled and mounted directly at the production

3.2

Thorn type 116.1550 FORM for minimal diameter of product 120mm

Welding thorn FORM to automats AWL 1550.T for minimal diameter of welded product of 120mm

(( √ )) Item is necessary for intended function of machine, HAS AN ALTERNATIVE (3.1, 3.3)
(( Combination )) Selection of this item precludes the selecting of item (3.1, 3.3)
(( Options )) Basis bar can be also made of stainless steel as custom made for welding of aluminum
(( Condition )) Assembled and mounted directly at the production

3.3

Thorn type 096.1550 KEY HOLE for minimal diameter of product 100mm

Welding thorn KEY HOLE to automats AWL 1550.T for minimal diameter of welded product of 100mm

(( √ )) Item is necessary for intended function of machine, HAS AN ALTERNATIVE (3.1, 3.2)
(( Combination )) Selection of this item precludes the selecting of item (3.1, 3.2)
(( Options )) Basis bar can be also made of stainless steel as custom made for welding of aluminum
(( Condition )) Assembled and mounted directly at the production

6

Integrated exhausting system (ended by pipe 100 mm)

Suction of welding fumes integrated directly into the construction without negative effect on welding process

(( √ )) Suction of welding fumes with channel integrated directly into construction, NO ALTERNATIVE
(( Combination )) None
(( Options )) Connection of this device is solved by pipe with diameter of 100 mm
(( Condition )) Assembled and mounted directly at the production

7

SET for permanent High - Amps welding

Special set of powerful cooling system with three ventilators and pressure segments with holes

(( √ )) Auxiliary element for better aftercooling after welding, NO ALTERNATIVE
(( Combination )) None
(( Options )) None
(( Condition )) Assembled and mounted directly at the production

8.1

Automatized phase of production with handly feeding

Software equipment providing functionality for controlled clamping by the operator

(( √ )) SW function connected to the additional set of the pneumatic valves, HAS AN ALTERNATIVE (8.2)
(( Combination )) Selection of this item precludes the selecting of item (8.2)
(( Options )) Changes in construction, or other technical and mechanical equipment are not required
(( Condition )) Assembled and mounted directly at the production

8.2

Automatized phase of production with no touch feeding

Software equipment providing functionality for fully automized clamping of the tube

(( √ )) SW function connected to the additional set of the pneumatic valves, HAS AN ALTERNATIVE (8.1)
(( Combination )) Selection of this item precludes the selecting of item (8.1)
(( Options )) Changes in construction and other mechanical equipment are necessary. Consultation is required
(( Condition )) Assembled and mounted directly at the production

9.1

Support of welding generator with surface of 160x400mm

Structural accessory serving as shelf for possible welding source of smaller dimensions

(( √ )) Welding source shelf with surface of 160x400mm, HAS AN ALTERNATIVE (9.2)
(( Combination )) This item precludes the selecting of item (9.2)
(( Options )) None
(( Condition )) Assembled and mounted directly at the production

9.2

Support of welding generator with surface 400x470mm

Structural accessory serving as shelf for possible welding source of bigger dimensions

(( √ )) Welding source shelf with surface of 400x470mm, HAS AN ALTERNATIVE (9.1)
(( Combination )) This item precludes the selecting of item (9.1)
(( Options )) None
(( Condition )) Assembled and mounted directly at the production

9.3

Support of plasma console

Structural accessory serving as shelf for possible plasma console

(( √ )) Shelf for possible plasma console, NO ALTERNATIVE
(( Combination )) None
(( Options )) None
(( Condition )) Assembled and mounted directly at the production

10

Digital OPEN CAN SET

Set of internal electronics and installation elements for digital connection of welding source

(( √ )) Allows full control of welding source, including program switching, NO ALTERNATIVE
(( Combination )) Can be used only with HST CREATIVE and CEBORA, limitedly LORCH (on request)
(( Options )) Two independent welding sources can be connected
(( Condition )) Assembled and mounted directly at the production

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE

Linear welding automat AWL SUPERFINE